Instruction in this article is intended to be non-phone specific. Therefore it speaks of functions rather than buttons and soft-keys, and it will avoid detailed reference to specific phone's display elements. This article's purpose is to give you direction on how to perform certain general phone operations without referring to the specifics of individual phone interfaces.
Phones And Call Handling
Placing a Call
You can place a call using your phone over the handset, speakerphone, or headset.
To make a call using handset simply pick up the handset and dial the number. You may also be able to dial first, then pick up the handset.
To make a call using the speaker phone - with the handset on hook, then press the speakerphone funtion. Once you have dial tone, you can then dial the number.
To make a call using a headset - press the New Call function. Once you have dial tone, you can then dial the number.
During a call, you can alternate between Speakerphone, Headset, or Handset modes by pressing the appropriate functions, or picking up the handset.
The name of the called party is displayed in the active window on the call screen.
The call duration of active calls is also visible on the call screen.
Answering A Call
- When not in another call, answering a call is as simple as picking up the handset, or pressing the Speakerphone function if you wish to communicate via speaker phone, or pressing the Answer Call function if you wish to communicate via headset.
- When in another call, and a call comes in it will likely be indicated by a call waiting tone and a flashing signal on the incoming call's corresponding line key. There should also be incoming call information in your phone's screen.
- Press the Hold function
- Find the incoming call's corresponding line key function and press it.
- Or select the call via the phone's screen interface and press the Answer Call function.
To reject an incoming call, press the Silence or Reject function.
Ending A Call
Do one of the following:
- If you are using the handset, press the EndCall function or replace the handset.
- If you are using a headset, press the Headset function
- If your are using the speakerphone, press the Speakerphone function
- Press the line key associated with the call (if this behavior has been configured by your system administrator).
Redial
To redial the last placed call from your phone press the Redial function.
Hold
During a call press the Hold function to place the call on hold.
To retrieve the call press the Hold or Resume function.
If multiple calls are on hold select the call you wish to retrieve by navigating the Phone's screen or by selecting the corresponding call's line key function and pressing the Hold or Resume function
Forwarding a Call
Call Forwarding is the phone's ability to direct a call to another party. It comes in two flavors. This feature is typically local to the phone, and may be overridden by call server settings. For more information, contact your system administrator.
Static Forwarding - You can configure your phone to forward all incoming calls.
- Select the Forward function
- If multiple lines are configured for your phone, select or enter the line you wish to have calls forawrded from.
- Select the forwarding type:
- Always - All incoming calls will be forwarded.
- No Answer - Only unanswered calls will be forwarded.
- Busy - Forward calls that come in while you are in another call.
- Enter a number for where to forwards calls. If you selected No Answer, then you may also be prompted to enter the number of rings to allow before the call gets forwarded.
Dynamic Forwarding - You can forward calls as your phone is ringing.
- When the phone rings, press the Forward function.
- Enter a number for where to forward the incoming call.
- Press the Enable function
How To Transfer
Transferring a call can be done in one of three ways:
Consultative transfer - The party to whom you want to transfer the call answers their phone before you transfer the call or hang up. You can consult with them before completing the transfer.
- During a call, press the Transfer function of your phone.
- Dial the number to which you wish to transfer the call.
- Once you hear the ringback sound or anytime after the party answers, press the Transfer function to complete the transfer. You may talk privately with the party to which you are transferring the call prior to completing transfer.
- You may cancel the transfer at any time before the call connects by accessing your phone's Cancel function.
Blind transfer - The call is automatically transferred after you dial the number of the party to whom you want to transfer the call.
- During a call, press the Transfer function of your phone.
- Press the Blind function of your phone.
- Dial the number to which you wish to transfer the call. From this point the call will be connected to the party to which you are transferring.
Attended transfer - The parties are automatically connected to each other after you exit the conference.
- Set up a conference call and then end your participation. For more information, see How To Conference below
How To Conference
You can create a conference with other parties using the phone’s conference function. You can create a conference at any time between an active call and a call on hold (on the same or another line. While in a conference, your phone's display will be populated with Conference related and functions.
SETTING UP A CONFERENCE
- Call the first party
- Press the Conference function of your phone
- The active call is placed on hold
- Call a second party
- When this party answers press the Conference function to add them to the conference.
- Repeat the following per person you wish to add to the conference.
- Press the Conference function to add another party.
- All members in conference will be placed on hold.
- Dial the next party member.
- Press Conference function again to add them to the conference.
CONFERENCE MANAGEMENT
Conference management is a capability granted to the person setting up the conference. With conference management you can view all parties in a conference call; you can also add, hold, remove, and mute specific conference participants. These functions are only available on certain phones.
To manage a conference you will simply press the Manage Conference function of your phone. Your phone display will populate with Conference Management related elements and functions.
- Add function - use the Add function to add members to the conference. Once the add function is accessed, adding members to the conference is the same as described above in Setting Up A Conference. Note: The Add function will only be available if you can add members to the conference. Your system administrator determines the maximum allowed participants in a conference.
- Dial the party member
- Once the party answers, press the Conference function.
- Repeat for each person you wish to add to the conference.
- Mute function - a muted party member can hear all parties in the conference, and no party can hear the muted party.
- To mute a party, select the party and press the Mute function.
- To unmute a party, select the party and press the Unmute function.
- Hold function - A party member on Hold can not hear the conference, nor can any parties in the conference hear them.
- To put a party on Hold, select the party and press the Hold function.
- To return the party to the conference, select the party and press the Resume function.
- Remove function - Use the Remove function to remove a party from the conference.
How To Park calls
You can create a call park in the portal by using the value of *31 for park 1, *32 for park 2, park *33 for park 3 and so on.
- While on the phone with a user press the park key and the call will be transferred to the park 1 orbit.
- To retrieve the parked call simply press the park key to retrieve the parked call.
- If the user does not have a park key but wants to retrieve a parked call they may dial *31 to retrieve the call.
- If the user does not have a park key and wants to place a call on park they may press blind transfer and dial *31.